We originally purchased MazaCAM because it was very user friendly and easy to make things happen with it. We’ve been using your software for over ten years now. Prior to this, whenever we got an order to run a part we had run previously, we used to go through the laborious job of printing out the old program, take it to a machine and then manually key it in on the control. Now all we do is use MazaCAM for converting the old program offline from the older Mazak control, convert it to the new Matrix control, download it and run the part. It works great.
We can go from the T1 and the T32 to the Matrix. We’ve also gone from a M2 to a Fusion on a mill and then from the Fusion to the Matrix as well. Having these capabilities has helped us a lot.
It probably saves us a couple of hours per program every time we do this, compared to how long it would take to manually key in the programs. Plus, this way we get something that we know has worked before instead of having to try out a new program as we go along.
We do at least five programs a month which probably saves us $80-$100 dollars every time we do this. And that’s without the cost of scrap.
The few times I’ve called in and needed some help, Tech Support has always helped me out right away. They’ve walked me through several things over the phone and showed me how it works.
If I were ready for another machine I would look at getting a Mazak because we know how to run it and we have your software—MazaCAM’s definitely a bonus.
For more information about MazaCAM, please call SolutionWare Corporation at 408.249.1529 or toll-free at 888.322.3226 (within the U.S.), or simply fill out the form on this site to get more info sent to you.