Program your CNC Machines:

Integrex, e-Machine, Nexus, Quick Turn, Super Quick Turn,
Multiplex, and the Smart machine.

The broad range of horizontal & vertical machining centers.

…And also all your G-code machines.

Program your Mazaks off-line, and don’t waste valuable machine time

Mazaks are valuable machine tools and it’s up to you to get the most out of them; most of all you want to achieve the highest level of efficiency possible. An example of inefficiency in a shop is machines tied down doing things other than cutting parts, like programming at the control, setup, etc. The MazaCAM Editor gives you advanced programming capabilities that are aimed at putting your Mazaks to work, and making you money.

MazaCAM is compatible with the range of generations of Mazak controls from the earliest T2 to the newest Matrix and Smart controls. It supports M2, M32, M-Plus, Fusion 640M, up from T1, T2, T3, T32, T-Plus, Fusion 640T, 640MT, Fusion-Pro, Matrix and Smart controls. It can also program all standard G-code CNC machines.

Advanced Mazatrol programming

The Mazatrol Editor provides you with the ability to write or edit programs on your PC in the comfort of your own office. Additionally it gives you advanced Mazatrol programming capabilities, not available otherwise that will help you get programming done faster. The MazaCAM Off-line Editor is a Windows® based application and it makes use of the standard Windows® features, resulting in a user-friendly programming environment.

Program Mazatrol in your Office or While on the Move

Now it is possible for you to program your Mazaks in the comfort of your own office, without any distractions. You can also install the MazaCAM Off-line Editor on your laptop and program parts wherever you are—at a client, while traveling, or throughout the shop. The MazaCAM Off-line Editor is in use nationwide and overseas, from large companies such as Boeing, Lockheed Martin, Caterpillar and ITT, to small start-up shops. Find out how your shop can benefit from this programming system by calling SolutionWare now.

Call us to see if we can program all your Mazak or G-code Machines!